Low-iron glass is a type of high-clarity glass that is made from silica with very low amounts of iron. This low level of iron removes the greenish tint that can be seen especially on larger and thicker sizes allowing other molecular imperfections to be easily seen. Low-iron glass is used for aquariums, display cases and other applications where high clarity is desired. Low-iron glass typically has a ferric oxide content of about 0.01%, ordinary plate glass has about 10x as much iron content........ When molten sand cools, it doesn't turn back into the gritty yellow stuff, it undergoes a complete transformation and gains an entirely different inner structure. Becomes to an amorphous solid state. It's like a cross between a solid and a liquid with some of the crystalline order of a solid and some of the molecular randomness of a liquid.
This is an upgrade of the newest and most efficient overflow ever designed (Zero Overflow). Zero space taken from the inside foot print allowing better performance of water flowing within the aquarium, very sophisticated and amazing slick appeal. Consist in a removable acrylic weir inserted on a cavity cutoff notch on the glass itself at a desired length. An external box made of smoked glass is assembled to the back with up to four drain holes accepting any type of plumbing also capable of handling a closed loop drain system withdrawing water from the bottom of the aquarium if this is desired as well. 3,000 Gallons per hour or more depending on size.
The newest and most efficient overflow ever designed. Zero space taken from the inside foot print allowing better performance of water flowing within the aquarium, very sophisticated and amazing slick appeal. Consist in a row of narrow slots built into the glass itself at a desired length. An external box made of smoked glass is assembled to the back with up to four drain holes accepting any type of plumbing also capable of handling a closed loop drain system withdrawing water from the bottom of the aquarium if this is desired as well. 3,000 Gallons per hour or more depending on size.
A Floating Bottom consists in assembling the body around the bottom panel instead of being on top. The bottom panel is the first part of the building process in our company. On aquariums larger than 100 gallons we require the bottom panel to have hidden reinforcing braces to add structural strength to the entire unit, the minimum thickness of a finished product is (one) inch 1". We use the same method regardless the shape or size of the aquarium.
The Double Euro Brace is mostly used in large fish tanks to add strength to the upper body and to prevent glass panels from bowing out due to the pressure created by the water volume along with wave makers and power heads, depending on size and shape of the aquarium sometimes Cross Braces are required to be assembled in addition as well.
The CORNER SEAM STRUCTURE REINFORCING BRACES is an upgrade of the Corner Seam Concealer. This item Is casted from molten glass to the dimensions and size required by each aquarium. Glass is heated to a very high temperature until become a hot thick liquid then poured into the mold. It has been designed not only to guard and protect the silicone seam from being damaged by sharp objects such as scrapers or magnets cleaners, but also to reinforce the integrity of the aquarium and its unique three dimensional shape feature is also a big help to the water flow within the aquarium corners since instead of obstruct the current, hides the inside corner helping flow water to freely revolve.
When setting up a sand-less aquarium the purpose of adding this board is protect the bottom panel from the rock-scape and avoid the reflection of the light for a better look of your fish and corals. ABS Board combines the strength and rigidity of acrylonitrile and styrene polymers with the toughness of polybutadiene rubber. It is considered superior for its hardness, semi gloss texture, toughness, and insulation properties.
Blackout Vinyl is a polyester product typically made of Polyethylene Teraphthalate (PET). In the aquarium industry films are applied to the exterior surface of a glass panel providing depth to your visual attraction giving the endless visual delusion, enhances the colors of your fish and aquascape of your tank. They also have a scratch resistant coating on the outer surface to protect the film.
This 100% water resistant panels are made in a form of a mixture of COMPOSITE and PVC FOAM CORE, laminated with high end acrylic on both sides. Two finishes are available - an ultra high gloss, and a velvet matte. Both finishes offer a smooth, flawless surface with an unsurpassed depth of colour and an amazing slick modern look.
Dosing Tubes Holders are made out either clear or smoked glass at any length or quantity of holders and assembled at a location required by the client. Using John Guess fittings or Rubber Uniseals for easy functionality.
ReefTops lids can also be customized according to the specifications of each Aquarium or Sump refugium. Providing a modern look, slick feel and most important the safety of your livestock. For more info please refer to: https://www.facebook.com/ReefTops/
